|
|
|
Exporter
|
The Exporter is the same high performance CNC plasma cutter as the G5 Fabricator, minus the heavy duty frame. This "gantry-only" model is designed for shipping to off-shore locations where shipping costs would be extremely high. This model is also an option for large domestic customers where shipping wide tables can be expensive or impractical.
The Exporter has all the same features as the G5 Fabricator, except it is dual-drive and the motors are located on each side of the gantry. The Exporter arrives fully assembled and tested and will attach to rail system that the customer builds beforehand based on the blueprints provided by FastCut CNC.
The frame for the Exporter can be built up to 20' using the standard cables supplied, and there are optional fiber optic cables for longer lengths.
|
|
The Exporter is available in any width from 4' to 10' using the standard cables, up to 20' with the optional fiber optic cables.
Most customers who are purchasing CNC plasma tables are welders/fabricators so building a frame and rail for the machine is not a hard project. This also saves the customer money in shipping and initial machine cost.
|
|
|
|
|
|
| Tool Cutting Area: | 3" over gantry width - 20' max for X length |
| Overall Dimensions: | Y length + 26", height 50" |
| Weight: | 5' gantry approx 65lbs |
| Input Power: | 120V AC (Table power only, not plasma source) |
| Motors: | Animatic Smart Servo Motors (with encoders) |
| Gearheads: | 28:1, stainless steel |
| Cables: | Sheilded - inside cable chain |
| Drive System: | Geared timing belts; dual drive X axis w/ 2 servo motors |
| Max Cut Speed: | 500ipm |
| Max Transfer Speed: | 500ipm |
| Torch Height Travel: | 4" (other heights available upon request) |
| Computer: |
AMD Sempron 2500+
80GB Hard Drive
512MB RAM
DVD/CD-RW Drive
17" Flat Screen LCD Monitor
|
| Software: |
Autodesk AutoSketch 9
OneCNC Profile 2003
|
| Warranty: |
1 year industrial warranty on table, and drives
1 year limited warranty on motors, electronics, and computer
Extended warranty for table, gantry, and drives available
|
|
|
|
|
